| |
SINGLE PHASE |
THREE PHASE |
| Output current |
10-25 A @ 120 VAC |
10-45 A @ 230 VAC |
10-45 A |
| Modes |
cutting / grid cutting / gouging / marking |
| Duty cycle |
40 % @ 25 A, 100 % @ 16 A |
50 % @ 45 A, 100 % @ 32 A |
80 % @ 45 A, 100 % @ 40 A |
| Rated output voltage [VDC] |
145 |
| Severance cutting capacity [mm] |
25+* |
| Piercing capacity [mm] |
10 (1) |
| Recommended cutting capacity [mm] |
12 (1) |
| Plasma gas |
compressed air / nitrogen / argon (marking) |
| Air flow [lpm/bar] |
90/4.5 |
| CNC interface / CAN BUS interface |
optional / optional |
| Preadjusted voltage divider ratio |
50:1 |
| Input voltage |
120 VAC ± 15 % |
230 VAC ± 15 % |
3 x 400 VAC ± 15 % (CE) |
| Frequency [Hz] |
50/60 |
| Weight [kg] |
12.7 |
| Certification depending on region |
CE / C-TICK / CCC |
| Maximum input pressure [bar/psi] |
10/145 |
| Protection level |
IP23S |
| Insulation class |
F |
| Type of hand torch |
FHT-EX®45TTH |
| Type of machine torch |
FHT-EX®45TTM |