ON-DEMAND MECHANIZED AND AUTOMATED PERFORMANCE
- Operate manually or in an automated setup to cut aluminum, stainless steel, and hardox materials up to 2”
DESIGNED FOR THE OPERATOR
- Easily control gas flow, current, and pilot arc with the included GRID mode for automatic switching between the pilot and main arc
SPEND LESS ON CONSUMABLES
- With THERMACUT® aftermarket consumables, re-use consumables instead of replacing all parts including useable parts as found in competitor cartridge solutions
CONNECT AND OPERATE WITH EASE
- Standard and BUS interfaces and internal power-on test results are also included on the display screen supporting total system integration and connectivity to Industry 4.0.
SPECIFICATIONS
| Output current [A] |
20 -125 |
| Modes |
cutting / grid cutting / gouging / marking |
| Duty cycle |
100 % @ 125 A |
| Rated output voltage [VDC] |
382.5 |
| Severance cutting capacity [mm] |
60(1) |
| Piercing capacity [mm] |
25(1) |
| Recommended cutting capacity [mm] |
40(1) |
| Plasma gas |
compressed air/nitrogen |
| Max. Air flow [lpm/bar] |
175/5.2 |
| CNC interface / CAN BUS interface |
optional / optional |
| Preadjusted voltage divider ratio |
50:1 |
| Input voltage [VAC] |
3 x 400 ± 15 % (2) |
| Frequency [Hz] |
50/60 |
| Weight [kg] |
37.7 |
| Certification depending on region |
CE, RCM, CSA |
| Maximum input pressure [bar/psi] |
10/145 |
| Protection level |
IP23S |
| Insulation class |
F |
| Type of hand torch |
FHT-EX®125TTH |
| Type of machine torch |
FHT-EX®125TTM |
(1) related to low-alloy steel (mild steel)
(2) suitable for generator use